NORSTAR SPEED DIAL PROGRAMMING
To enter a programming session, follow the next steps:
1) Press FEATURE * * 2 6 6 3 4 4
2) Enter Password: 2 6 6 3 4 4
The display will read: “ Terminals & Sets“
3) Press: NEXT
The display will read: “Lines“
4) Press: NEXT
Display will read: “Services“
5) Press: NEXT
The display will read: “System Speed Dial“
7) Press: SHOW
The display will read: “Speed dial #:__“
Hint: Begin your System Speed Dials with “01” Enter 01 or 02 or 03 etc.
The display will read: System Speed Dial #: 01
8) Press: SHOW
The display will read: “No number stored“
9) Press the “CHANGE” softkey.
The display will read: “#01:”
10) Enter the Speed Dial number Press the “OK” softkey.
11) Press: NEXT
The display will read: “Use prime line“
12) Press: NEXT
The display will read: “Display digits:Y“
13) Press: NEXT
The display will read: “Bypass restr’n:N“
14) Press: NEXT
Speed dial 01 has now been programmed: To program another Speed Dial Number, repeat steps 6 thru 14.
Congratulations! You now have learned to program Speed Dials!